nRF7000
Ultra-low-power single-band Wi-Fi 6 companion IC. Designed for the most cost-sensitive connected IoT products needing basic Wi-Fi alongside a Nordic BLE host SoC.
prj.conf, CMakeLists.txt, Devicetree overlays) targeting this MCU.Ultra-low-power single-band Wi-Fi 6 companion IC. Designed for the most cost-sensitive connected IoT products needing basic Wi-Fi alongside a Nordic BLE host SoC.
Specifications
| Spec | Value |
|---|---|
| Flash | N/A (companion) |
| Ram | N/A (companion) |
| Core | Companion IC |
| MaxClock | N/A |
| Gpio | 0 |
Wireless Protocols
wifi-6
Hardware Features
single-band-wifi, wifi-6, ultra-low-power-wifi, companion-ic
Vendor
Nordic Semiconductor — SDKs: nRF Connect SDK, Zephyr RTOS
Recommended Use Cases
Browse Solutions
No pre-built solution recipe currently targets nRF7000 directly. Browse the full recipe catalog to find a closely related starting point.
nRF54LM20
The flagship nRF54L series SoC built on a 22nm process, featuring a 128 MHz ARM Cortex-M33 + RISC-V co-processor with 2MB Flash and 512KB RAM — the largest memory in the nRF54L family. Supports Bluetooth LE, Matter, Thread, Zigbee, and 2.4 GHz proprietary protocols up to 4 Mbps. The nRF54LM20A variant adds 66 GPIOs and high-speed USB; the nRF54LM20B adds an integrated Axon NPU for hardware-accelerated Edge AI inference. Security includes TrustZone, CRACEN cryptographic engine with side-channel protection, and tamper detection.
nRF7001
Single-band Wi-Fi 6 companion IC with WPA3 support. Adds 2.4 GHz Wi-Fi to existing nRF52/nRF53 designs with a smaller footprint than the dual-band nRF7002.